Mudguards
650B aluminium mudguards for gravel bikes and MTBs, 48 mm | 26 inches | silver
Lightweight 48 mm wide retro randonneur mudguards, polished aluminium Suitable for vintage 26-inch MTBs with approx. 50 mm tyres, fit perfectly, pictures on the bike to follow! Sturdy, elegant design made of thin aluminium sheet High-quality workmanship with a silky gloss finish and stainless steel mounting parts 48 mm wide for tyre widths up to max. 48 mm Suitable for 26-inch or 650B wheel sizes The relatively wide mudguards fit beautifully on your classic MTB urban city bike. If there are no corresponding eyelets on the dropouts, adapter plates from Gamoh, for example, are required. Note: Mudguards cannot be test-fitted as this always results in scratches, dents, etc.!Please check in advance whether installation is possible: Eyes on the dropouts, with or without threads, which screws are required? Hole in the small cross strut in the crank area, can I drill it or use the Honjo clip if necessary? Enough space between the tyres and brakes?
Studio aluminum mudguards 30mm narrow, light, silver shiny anodized
slim superlight aluminum mudguards in shiny silver anodized finish sturdy, elegant design made of thin aluminum plate high quality finish with silky shiny finish and stainless steel attachments 30mm width for tire width up to max 28 mm Wheel size 28 inch / 700c The narrow mudguards fit beautifully on your classic randonneur or city runabout. Mounting only possible if appropriate eyelets are available on the dropouts. Note: Mudguards can not be trial mounted, because there are always scratches, light dents, etc.! Please check beforehand whether mounting is possible: Eyes on the dropouts, with or without thread, which screws are needed? Hole in the small cross brace in the crank area, can I drill, or use the Honjo clip if necessary? Enough space between tires and brakes?
Studio Brisant stainless steel fenders hand polished - 28 inch in 48mm width
made of polished stainless steel stable and high quality with stainless steel struts external mounting as in the neighbouring range (chrome struts are no longer available), Bracket and mounting material (but no extra long screws for mounting on the drop out eye without thread, because too individual) Made in Italy exclusively for Studio Brisant Wheel size 28 inch / 700c / for tyre widths around 37 to max 42 mm the studio Stadt Rad for Daks is not included in the article; but can be ordered "individually Note: Mudguards cannot be tried out, because there are always scratches, light dents etc.! Please check beforehand whether mounting is possible: Eyes on the dropouts, with or without thread, which screws are required? Hole in the small cross brace in the crank area, can I drill or use the Honjo Clip if necessary? Enough space between tires and brakes?
Studio H-80 mudguards 26 inch (650B) set 62mm polished stainless steel
Studio Brisant H-80 Fenders 26 (650B) mudguard set polished stainless steel Width: 62 mm - height 28 mm, radius 355 mm for tires 44 to 48 mm Polished stainless steel with 4 mm stainless steel struts, bracket and mounting material Super quality from Italy - very noble Wheel size 650 very stable Stainless steel struts are mounted on the inside, making them very stable (see pictures) The beautiful fenders are a homage to the Honjo H 80 aluminum fenders and have the same dimensions, Honjo are only longer.
HONJO H-50 Fenders 20 inch N fender set polished aluminum
HONJO H-50 Fenders Mudguard set polished aluminum for 20 inch 20 "x1,35-1,50 Width: 51 mm Polished aluminum with 5 mm struts, bracket and mounting material Super quality from Japan - very noble very stable and at the same time extremely light The beautiful mudguards from Honjo are very rare and hard to come by, what makes them so special? The unique workmanship and the highest quality from a family business in Japan guarantee an enrichment for every bike. You might think that the price is too high, but the mudguards are worth every euro.
Dia-Compe ENE FR-35 mudguards polished aluminum 28 inch
Dia Compe ENE mudguards polished aluminum - 28 inch Aluminium glossy anodized with struts, bracket and mounting material (but no screws for mounting on the dropout eyelet, as too individual) Wheel size 28 inch / 700c / for tire width up to 35 mm Width 41 mm
HONJO H-47CN Hammered Fenders 650B 48 mm Mudguard set hammered
width: 48 mm Polished aluminium with 5 mm struts, bracket and mounting Material Super quality from Japan - very noble wheel size 26 inch / 650B very stable and at the same time extremely light The beautiful fenders from Honjo are very rare and hard to get, what makes them so special? The unique workmanship and the highest quality from a family business from Japan guarantee an enrichment for every bike. You might think that the price is too high but the fenders are worth every Euro. But they are also difficult to mount, sometimes you are busy with them all day long.
HONJO H-30 Fenders 700C in 30 or 41 mm fenders set polished aluminium
width: in 30 or 41 mm Polished aluminium with 5 mm struts, bracket and mounting Material Super quality from Japan - very noble wheel size 28 inch / 700c / for tyre width 23-25 mm(30) to 36 mm(41) very stable and at the same time extremely light The beautiful fenders from Honjo are very rare and hard to get, what makes them so special? The unique workmanship and the highest quality from a family business from Japan guarantee an enrichment for every bike. You might think that the price is too high but the fenders are worth every Euro. But they are also difficult to mount, sometimes you are busy with them all day long.
HONJO H-27C Hammered Fenders 700C 35 mm fender set hammered
width: 35 mm Polished aluminium with 4 mm struts, bracket and mounting Material Super quality from Japan - very noble wheel size 28 inch / 700c / for tyre width 23 mm to 28 mm very stable and at the same time extremely light The beautiful fenders from Honjo are very rare and hard to get, what makes them so special? The unique workmanship and the highest quality from a family business from Japan guarantee an enrichment for every bike, you might think the price is too high but the fenders are worth every Euro. But they are also difficult to mount, sometimes you are busy with them all day long.
Studio mudguards stainless steel B-goods | 28 inch polished
B-goods from returns (traces of assembly, small light dents etc. possible) reduced by up to 50%, depending on condition! made of polished stainless steel, stable and high quality, also in narrow 36 mm Set consists of front wheel + rear wheel mudguard with struts, bracket and mounting material (short screws for mounting on the dropout eyelet "with thread" are included, if longer ones are needed please write a message) Made in Italy exclusively for Studio Brisant Wheel size 28 inch / 700c / for tire width for mounting with nuts please buy "bolt set" in the neighboring offer additionally, because too individual in 36 mm "can" be mounted with clamp (included with 36 mm), from 42 mm the clip is used so that the struts rest on the sheet metal, otherwise too wobbly Widths: available in 36 mm + 42 mm + 48 mm up to 28 mm tire width -36 mm recommendedfrom 28 to approx. 35 mm tire width -42 mm recommendedfrom 36 to approx. 42 mm tire width -48 mm recommended Remark: Mudguards cannot be tried on, as scratches, light dents etc. always occur!Please check beforehand whether mounting is possible: Eyes on the dropouts, with or without thread, which screws are required? Hole in the small cross brace in the crank area, can I drill it or use the Honjo clip use? Is there enough space between the tires and brakes?
Gilles Berthoud stainless steel - Mudguards 28 inch / 40 mm wide "short" version
the Randonneur wheel is not part of the article; made of polished stainless steel, very stable and high quality with struts, bracket and screws VR Fender normal length wheel size 28 inch / 700c / for tyre width 20-32 mm 40 mm wide, weight 650 gr the mounting of the VR mudguard is done by an adapter/suspension in the middle of the fork/brake web or as shown in the picture luggage rack mount short version of the front mudguard
Gilles Berthoud stainless steel - Mudguards 28 inch / 40 mm wide "long" version
the Randonneur wheel is not part of the article; made of polished stainless steel, very stable and high quality with struts, bracket and screws *VR mudguard "long" as seen on the sample wheel (long dimension is better for VR - carrier) wheel size 28 inch / 700c / for tyre width 20-32 mm 40 mm wide, weight 650 gr the mounting of the VR mudguard is done by an adapter/suspension in the middle of the fork/brake web or as shown in the picture luggage rack mount long version of the VR mudguard
HONJO H-31 Fenders 26 (650) N Mudguard set fluted aluminium polished
HONJO H-31 Fenders 26 (650) N Mudguard set fluted aluminium polished width: 45 mm Polished aluminium with 5 mm struts, bracket and mounting Material Super quality from Japan - very noble wheel size 650 very stable and at the same time extremely light The beautiful fenders from Honjo are very rare and hard to get, what makes them so special? The unique workmanship and the highest quality from a family business from Japan guarantee an enrichment for every bike. You might think that the price is too high but the fenders are worth every Euro.
Contec bamboo mudguards Woody Set in brown 32 mm width
very light high quality and extremely durable bamboo fender set with very nice finish chromed fastening struts For frame 700 x 28 incl. mounting material Widths: 32 mm available
HONJO H-50-C Fenders 26-650 Fender set "Hammered" aluminium polished
HONJO H-50-C Fenders 26/650 fenders set "Hammered" aluminium polished width: 52 mm Polished aluminium with 5 mm struts, bracket and mounting Material Super quality from Japan - very noble wheel size 26/650 very stable and at the same time extremely light The beautiful fenders from Honjo are very rare and hard to get, what makes them so special? The unique workmanship and the highest quality from a family business from Japan guarantee an enrichment for every bike. You might think that the price is too high but the fenders are worth every Euro.
HONJO H-80 Fenders 26 (650) N Mudguard set polished aluminium
HONJO H-80 Fenders 26 (650) N Mudguard set polished aluminium width: 62 mm - height 28 mm Polished aluminium with 5 mm struts, bracket and mounting Material Super quality from Japan - very noble wheel size 650 very stable and at the same time extremely light The beautiful fenders from Honjo are very rare and hard to get, what makes them so special? The unique workmanship and the highest quality from a family business from Japan guarantee an enrichment for every bike. You might think that the price is too high but the fenders are worth every Euro. But they are also difficult to mount, sometimes you are busy with them all day long.
HONJO H-50 Fenders 700N fenders set aluminium polished
HONJO H-50 Fenders 700N fenders set aluminium polished width: 52 mm Polished aluminium with 5 mm struts, bracket and mounting Material Super quality from Japan - very noble wheel size 700N very stable and at the same time extremely light The beautiful fenders from Honjo are very rare and hard to get, what makes them so special? The unique workmanship and the highest quality from a family business from Japan guarantee an enrichment for every bike. You might think that the price is too high but the fenders are worth every Euro.
Studio Brisant stainless steel mudguard set hand polished 28 inch
made of polished stainless steel, stable and high quality, also available in narrow 36 mm Set consists of front wheel + rear wheel mudguard with struts, bracket and mounting material (short screws for mounting on the dropout eyelet "with thread" are included, if longer screws are required, see Screw set Made in Italy exclusively for Studio Brisant Wheel size 28 inch / 700c for mounting with nuts please buy "bolt set" in the neighboring offer additionally, because too individual in 36 mm "can" be mounted with clamp (included with 36 mm), from 42 mm the clip is used so that the struts rest on the sheet metal, otherwise too wobbly Widths: available in 36 + 42 + 48 + 51 mm Length VR 740, HR 1210mm (for 36 to 51 mm plates) NEW in 62mm width and size 27.5 inch 650B with 355mm Radius (below the pictures there is an example of a customer's bike with the 650B plates, on a 26 inch MTB bike) Micro scratches on the side seam are possible, but only visible very close up and not noticeable after mounting, professors of cycling please do not buy! up to max. 32 mm tire width - 36 mm recommendedfrom 32 to approx. 35 mm tire width - 42 mm recommendedfrom 37 to approx. 40 mm tire width - 48 mm recommendedfrom 38 to approx. 42 mm tire width - 51 mm recommended NEW in our program: 30mm Alu Studio plates for 25 to max 28mm tires Remark: Mudguards cannot be tried on, as scratches, light dents etc. always occur! Please check beforehand whether mounting is possible (see mounting instructions): Eyes on the dropouts, with or without thread, which screws are required? Hole in the small cross brace in the crank area, can I drill or use the Honjo clip use? Enough space between tires and brakes? under "mudguard accessories" you will find adapters for axle mounts or quick releases
Dia-Compe ENE F3 mudguards silver, black 47mm | 700C
Dia-Compe hammer blow mudguards ENE F3 for 28 inch "Randonneur" Color: shiny silver Material: aluminum suitable for tire width 700X35C~700X38C Length: 735mm (front), 1140mm (rear) Width: 47mm Depth: 20mm Weight: approx. 560g Set includes stays, mounting accessories and mudguards Made in Taiwan
Dia-Compe ENE Schutzblech Montageset für F1 | F2 | F3 Bleche
Dia-Compe ENE Schutzblech Montagesets F1 / F2 für ca. 36mm Breite Bleche F3 für ca. 47cm Breite Bleche aus hochwertigem Aluminium Farbe: Silber Ohne Streben Made in Taiwan
Contec aluminum mudguard set in silver matt, black 32 | 42 mm
Contec aluminum mudguard set in silver or black silver matt is NEW in the offer, polished is unfortunately no longer produced in 32 mm or 42 mm Extremely stable, straight and flat, incl. struts chrome-plated mounting braces For frame 700 x 28 incl. mounting material black or silver and available in 32 mm or 42 mm 32 mm black from return was slightly bent at the HR plate and is straightened again! the right option not to get a wet butt
XLC Mini Muduard in different colors
XLC Mini Muduard made of plastic Color: pink, blue or camourflage Weight: very light perfectly suited for modern MTB's or road bikes!
Dia-Compe ENE fenders hammered 28 inch in 36 mm width Hammered
Dia Compe ENE fenders hammered 28 inch in 36 mm width Hammered made of Alumiunium, very beautifully worked and high quality with struts, bracket and mounting material (but no screws for fixing to the drop out eye, because too individual) wheel size 28 inch / 700c / for tyre width up to 28 mm width: 36 mm depth/height: 20 mm Length: front - 735 mm , rear - 1140 mm available in silver polished or black anodized The Hammerschlag fenders give every bike something special and make it a real eye-catcher!
Dia-Compe ENE F-1 fenders polished aluminium + black 28 inch in 35 mm width
Dia Compe ENE fenders polished aluminium - 28 inch in 35 mm width made of Alumiunium, very beautifully worked and high quality with struts, bracket and mounting material (but no screws for fixing to the drop out eye, because too individual) wheel size 28 inch / 700c / for tyre width up to 28 mm width 35 mm Depth/height 20 mm available in silver polished or black