Cyclus Tools
CYCLUS TOOLS assembly tool for conv. bottom bracket, 37 mm SW right-hand bearing shell
Workshop version Top quality for efficient work Wrench opening: 37 mm right-hand bearing shell
CYCLUS TOOLS Puller Cassette - Shimano Hyperglide
Workshop version Top quality width across flats: 24mm
Cyclus assembly gloves commercial rubberized
Cyclus assembly gloves from trade with rubberized hand inner surface comfortable to wear Size L
CYCLUS TOOLS Puller bottom bracket + Campagnolo + Ultra Torque+Sram+Miche + 3/8 "inch
Workshop version Top quality Ultra/Power Torque + Sram GXP + Miche Evo Max with 3/8" inch drive
Cyclus Tools Puller Inner Bearing | FAG
Cyclus Tools Bottom bracket hexagon puller FAG 28 mm wrench size 6 teeth Material: stainless steel suitable for FAG as well as for Campagnolo bottom brackets such as Centaur (up to 2006), Mirage or Veloce
CYCLUS TOOLS fork cone puller - 1 inch forks lSuspension forks, IHS forks etc
Workshop version The advantage of the fork cone remover is that you do not scratch the fork when removing the fork cone and do not damage the headset cone ring. The fork cone puller is universally usable for pulling off fork cones up to max. 40 mm.as an accessory you will receive a replacement claw for pulling off fork cones up to max. 49 mm It is suitable for all types of headsets or forks (e.g. suspension forks, IHS forks, etc.
CYCLUS TOOLS spoke nipple holder for nipple turning in high rim profiles
Spoke nipple holder for turning nipples into high rim profiles
CYCLUS TOOLS impactor - for Ahead claw 1" and 1 1/8"
Workshop version for Ahead claw 1" and 1 1/8 The Cyclus Tools impactor guarantees exact insertion of the Ahead claw into the steerer tube at a previously defined impact depth Screw the required socket into the impactor by hand (1" or 1 1/8"). Now screw the claw to be mounted onto the grub screw using the cross hole as far as it will go. Place the tool on the steerer tube and hammer it in with a hammer until it stops. By turning the knurled screw to the left, you can then remove the impactor from the steerer tube.
CYCLUS TOOLS cutting oil in dropper bottle 100ml - for milling and cutting work
Workshop version Special oil suitable for milling and cutting work for the easier processing of cutting operations e.g. thread cutting, milling
CYCLUS TOOLS ejector 1 1/8" inch headset ejector
Workshop quality "Made by Cyclus to recommend without reservation, my daily tool 1 1/8" inch (28.6 mm)
CYCLUS TOOLS milling tool for head tube 1 "inch 30 mm
Workshop version "Mady by Cyclus Tools Top quality for perfect work
CYCLUS TOOLS Straightening tool for pressing out leveling strokes
Workshop version Weight: 532 g It may be necessary to loosen or remove individual spokes before use. Place the tool in the place of the height impact to be removed (recess in the rim) between the hub body and the inside of the rim. Now press out the impact by turning the spindle with the enclosed toggle.
CYCLUS TOOLS spoke wrench for Shimano system wheels
Workshop version This spoke wrench is suitable for centering Shimano system wheels 4.3 mm and 4.4 mm mounting with a plastic sheath for comfortable and non-slip application Weight: 62 g
CYCLUS TOOLS ejector 1" inch headset ejector
Workshop quality "Made by Cyclus to recommend without reservation, my daily tool in 1" inch (25.4 mm)
CYCLUS TOOLS pair of taps M14 pedal thread left/right
Workshop version The pair of taps for pedal threads 9/16" is designed for recutting pedal threads The scope of delivery includes a tap for the left pedal thread (milled ring below the tap holder) and a tap for the right pedal thread (no milled ring) Use a suitable tap wrench to cut the pedal thread
CYCLUS TOOLS spoke wrench for MAVIC system wheels - 9mm & 6mm
suitable for centering Mavic system wheels The storage key has a double recording suitable for 7 slotted nipples with 9 mm outer diameter or 6 slotted nipples with 5.5 mm outer diameter A plastic cover provides the possibility to work comfortably and without slipping When using the spoke wrench, always follow the manufacturer's instructions and, in the case of aero spokes, use the counterholder to prevent the spokes from twisting.
CYCLUS TOOLS chain whip sprocket wheel dismantling tool - for 9-10x cassettes
Workshop version for clean work The tool is suitable for assembling and disassembling bolted rings as well as for mounting such rings on the hub body. Furthermore, HD and ED cassettes can be removed from the hub rotor (with the aid of the appropriate puller). Place the chain (1) on the sprocket teeth according to the desired direction of rotation and support the lever on the chain segment (2).
CYCLUS TOOLS Taps M3 + M5 + M10
Workshop quality "Made by Cyclus for selection in M3, M5 or M10 3 mm x 0,5 suitable e.g. for screws in the drop-out 5 mm x 0.8 suitable e.g. for bottle holder drilling and luggage rack drilling 10 mm x 1 suitable e.g. for derailleur hanger thread and the front derailleur fixing screw
CYCLUS TOOLS Nipple Clamp 3.2 mm + 3.4 mm
Workshop quality "Made by Cyclus for selection in: 3.2 mm plastic red, 3.4 mm plastic black 3.2/3.4 mm stainless steel
CYCLUS TOOLS Winch iron adjustable in different sizes
Workshop quality "Made by Cyclus Tools in 3 different sizes selectable
Cyclus Tools cone wrench 12 - 28 mm bicycle key
NEW Cyclus Tools Cone wrench 12 - 28 mm bicycle key Size to choose from: 12 mm + 13 mm + 14 mm + 15 mm + 16 mm + 17 mm + 18 mm + 19 mm + 20 mm + 22 mm + 24 mm + 28 mm Price for 1 piece Plastic sheathing
CYCLUS TOOLS centering bit for pre-spoke wheels
Workshop version adjustable can also be used with a cordless screwdriver