Tange Seiki
Tange Seiki 1 inch cartridge headset "Techno Glide" silver + black
high quality Techno Glide Dural Aluminium "Leightweight" Ahead headset Material: Dural aluminium in silver or black anodised available sealed roller bearings 1 Inch Shank Diameter Bearing shells: 30.2 mm (inner diameter of head tube) Fork cone: 26.4 mm (inner diameter) Mounting height: 25.8 mm (14.5 mm above, 11 mm below) Weight: 96 g Top lightweight headset, Tange Seiki quality Attention: Variant "silver" unfortunately got a black cap- a"silver cap" without logo will be delivered separately!
1 inch tang Single speed stem, fixie 0° degrees
high quality and beautiful stem from Tange Japan for shank diameter 22.2 mm 0° degree inclination Clamping dimension 26 mm stem length 85 mm and 100 mm available, stem length 150 mm Aluminium in silver
NOS Tange Japan Bottom bracket 4 edge JIS 114,5 mm FRA
NOS Tange Japan Bottom bracket 4 edge JIS 114,5 mm FRA with French thread width: 114,5 mm New with minimal bearing marks SELTEN! Made in Japan
Tange Seiki RDC-82 Ahead headset 1 1|8" inch silver | black
Tange Seiki RDC-82 Ahead headset 1 1|8" inch silver, black high-quality Technoglide Duraluminum "Lightweight" Ahead headset Material: Duraluminium in silver or black anodized to choose from sealed roller bearings 28.6 mm shaft diameter Bearing shells: 34 mm (inner head tube diameter) Fork cone: 30 mm (inner diameter) Installation height: 26.2 mm (14 mm top, 12.2 mm bottom) Weight: 113 g Top lightweight headset - Tange Seiki quality
1 inch Tange Seiki Falcon FL 250 thread headset chrome - polished *
1 inch Tange Seiki Falcon FL 250 thread headset Special model in super high polished, chrome-plated weighted average sealed tax rate Bearings with seals on both sides 1 inch shank diameter Bearing shells: 30 mm (inner diameter of head tube) Fork cone: 26.4 mm (inner diameter) Installation height: 38 mm (27 mm above, 11 mm below) Weight: approx. 84 g
Tange Seiki Levin NJS headset 1 inch with 26.4 cone
Tange Seiki Levin NJS headset 1 inch more installation height than its little brother and classic design Chrome-plated headset for 1" threaded forks Material: CroMo steel CNC-machined construction Ball bearings (5/32" balls), sealed 1 inch stem diameter Bearing shells: 30.2mm (inner diameter of head tube) Fork cone: 26.4mm (inner diameter) Installation height: approx. 38mm (25.5mm top, 12.4mm bottom) Weight: 155 g Very durable construction. NJS approved! Very good running characteristics and fits perfectly with all vintage racers
Tange Seiki Levin CDS headset 1 inch 27mm cone silver | black | satin
Tange CDS headset for 1" threaded forks in black Material: CroMo steel in chrome-plated or black anodized to choose from CNC-machined construction Ball bearings (5/32" balls), sealed 1 inch shaft diameter Bearing cups: 30 mm (inner head tube diameter) Fork cone: 27 mm (inner diameter) Installation height: approx. 36 mm (25.5 mm to top edge, 11 mm at the bottom) Weight: 145g Very good running properties, (often the last resort when the thread is very short and no headset will fit....)
Tange Seiki Levin 1 inch CDS headset 26.4mm cone
Tange Seiki Levin CDS 1 inch Headset Neighboring offer with 27mm cone and 30 mm shells, see link often the last option if the steerer tube was shortened a lot, e.g. if a Shimano 105 headset was installed! Chrome-plated headset for 1" threaded forks 3 colors available: Chrome, black, satin (silver-grey) Material: CroMo steel in chrome-plated to choose from CNC-machined construction Ball bearing (5/32" balls), sealed 1 inch shaft diameter Bearing cups: 30.2 mm (inner head tube diameter) Fork cone: 26.4 mm (inner diameter) Installation height: approx. 36 mm (approx. 26 mm to top edge, 10.2 mm at the bottom) Weight: 145 g
1 1/8 inch Tange Seiki "FL270C" Aluminium Headset Head Set silver + black
Aluminum headset for 1 1/8 " Threaded forks Material: aluminium in silver or black anodised available double sealed deep groove ball bearings 28.6 mm Shaft diameter Bearing shells: 34 mm (inner diameter of head tube) Fork cone: 30 mm (inner diameter) Installation height: approx. 39 mm ( approx. 26 mm above, approx. 13 mm below) Weight: approx. 101 g high quality headset with good running characteristics Made in Taiwan
1 inch Tange Seiki Falcon FL 250 thread headset sealed silver + black
weighted average sealed tax rate Material: aluminium in silver or black anodised available Bearings with seals on both sides 1 inch shank diameter Bearing shells: 30 mm (inner diameter of head tube) Fork cone: 26.4 mm (inner diameter) Installation height: 38 mm (27 mm above, 11 mm below) Weight: 84 g*. Top headset, Tange Seiki quality Made in Taiwan
Tange Seiki Levin CDS Steuersatz 1 Zoll 27mm Konus silber | schwarz | satin
Tange CDS Steuersatz für 1" Gewindegabeln in schwarz Material: CroMo Stahl in verchromt oder schwarz eloxiert zur Auswahl CNC-gefertigte Konstruktion Kugellager (5/32" Kugeln), gedichtet 1 Zoll Schaftdurchmesser Lagerschalen: 30 mm (Steuerrohrinnendurchmesser) Gabelkonus: 27 mm (Innendurchmesser) Einbauhöhe: ca. 36mm (25,5 mm bis Oberkante, 11mm unten) Gewicht: 145g Sehr gute Laufeigenschaften, (oft die letzte Rettung wenn das Gewinde sehr kurz ist und kein Steuersatz mehr passen will....)
Tange Seiki 1inch Falcon FL 250 headset cups 30 or 30.2 mm
high-quality sealed headset Material: aluminum in silver or black anodized to choose from sealed bearings on both sides 1 inch shaft diameter Bearing shells: in 30 or 30.2 mm (inner head tube diameter) available (see Drop Down) Fork cone: in 27 or 26.4 mm (inner diameter) available (see Drop Down) Installation height: 38 mm (27 mm top, 11 mm bottom) Weight: 84 g* Top headset, Tange Seiki quality Made in Japan
1 inch Tange Passage DX Aluminium Headset Head Set
Aluminium headset for 1" threaded forks Material: aluminium in silver or black anodised available Ball bearing (5/32" balls), sealed 1 inch shank diameter Bearing shells: 30 mm (inner diameter of head tube) Fork cone: 26,4mm (inner diameter) Installation height: approx. 38 mm ( approx. 25 mm above, approx. 13 mm below ) Weight: 101 g good and favourable tax rate with good running characteristics Made in Taiwan
Tange Seiki J-27 - 1 1/8 headset headset "Techno Glide" in silver + black
high quality Techno Glide Dural Aluminium "Leightweight" Ahead headset Material: Dural aluminium in silver or black anodised available sealed roller bearings 1 1/8 inch shank diameter Bearing shells: 34 mm (inner diameter of head tube) Fork cone: 30 mm (inner diameter) Mounting height: 26.2 mm (14.7 mm top, 11.5 mm bottom) Weight: 108 g Top lightweight headset, Tange Seiki quality Made in Taiwan
1 1/8 inch Tange "Passage DX" Aluminium Headset Head Set in silver + black
Aluminium headset for 1 1/8 " threaded forks Material: aluminium in silver or black anodised available Ball bearing (5/32" balls), sealed* 28.6 mm Shank diameter* Bearing shells: 34 mm (inner diameter of head tube)* Fork cone: 30 mm (inner diameter)* Mounting height: approx. 38 mm ( approx. 24.8 mm above, approx. 11.4 mm below ) Weight: approx. 118 g*. good and favourable tax rate with good running characteristics Made in Taiwan
Tange Seiki 1" inch Falcon bearing shells 30.2mm set only shells
Tange Seiki bearing shell VE 1 set Suitable only for original Tange Falcon 1" headset bearing Press-in dimension 30,2mm Standard on many Italian frames from the 70-80's, Koga Miyata/Japan mostly need 30mm headset