Products from Studio Brisant

Chainring bolts Spacer Spacer rings for road bike crank Spacer e.g. for the conversion of 2-speed cranks to a single-speed crank Price per piece are placed under the chainring nuts easy fitting Spacer height: 0.6 mm, 1.2 mm, 2.0 mm, (3.5...

Price is per piece Aluminium silver high gloss anodised optimal to adjust the seat position in silver or black selectable Outer diameter 32 mm, inner diameter 25.4 mm variants available in 2 + 5 + 10 + 15 + 20 + 30 mm

for steel frames with corresponding threaded holes M3 great quality, completely in silver Length 30 or 42 mm (at 30 mm shorten the spring if necessary) Price is for one pair (2 pieces)

Clamping screw M5 + M6 for side-pull brakes Brake cable clamping screw for selection: M5 or M6 thread Brake cable clamping screw for old type side cable brake Price per 1 piece

Ball holder for headset 1" or 1 1/8" inch Price per piece two different ball rings for 1 inch or 1 1/8 inch headset 1" ball ring has 16x 5/32" balls 1 1/8" ball ring has 22x 5/32" balls BSA inner bearing ball ring has 9x 1/4" balls

1 1/8 inch Aluminium spacer for steerer tube Price is per piece Aluminium black anodized available in silver or black and 4 heights 2 + 5 + 10 Attention 30 mm 50 mm spacers are wider and do not fit with the others! optimal to adjust the...

Straight aluminium handlebars with plastic plug simple but good silver shiny anodized, like polished perfect for a vintage racer to convert to a straight handlebar/speedbike Model Flat 3°, almost straight Width 58 cm, Diameter 22.2 mm,...

Galvanized steel base frame available in four anodised colours silver - black - red - blue - gold - bronze (new) nice detail is the nut in brass colour Clamp fits for racing handlebars / or also 22.2 mm clamp Price is per piece - Please...

Simple - stable - effective 4x clamping rubbers in 6 different colours length: approx. 60 cm without tension

CrMo Seat Pin 8mm without nose M6x20mm + M6x25mm Seat pin without nose for classic road bikes/ steel frames Diameter: 8 mm Thread: M6 Length: 20mm, 25 mm(inside) to choose from Price for 1 piece Color: silver

Tension axles variants in silver polished or black for front or rear wheel hubs available individually, as "set" or "set + seat clamp Saddle clamp bolt M6x55mm Aluminium closures + steel axle Installation width HR from 120 mm(shortening)...

made of polished stainless steel, stable and high quality, also in narrow 36 mm Set consists of front wheel + rear wheel mudguard with struts, bracket and mounting material (short screws for mounting on the drop out eye "with thread" are...