Sunrace derailleur adapter replacement derailleur hanger axle plate dropout

NOS Shimano shift cable cable guide clamp cable counter bracket down tube for down tube diameter 28.6 mm standard tube steel frame chromed stops on both sides e.g. to install Ergopower levers / handlebar brake levers on frames without a base

Coloured anodized aluminium cable sleeves, suitable for shifter cables up to 1.2 mm - brake cables up to 1.8 mm perfect for a vintage racer or singlespeed - the "icing on the cake"... 1 piece all colors available*

Attention: partly no more Jagwire print on the cover, if important please ask in advance! high-quality brake cable housing CGX-SL super classy look Diameter 5 mm Weight at 2.5 m = 125-130 grams Length 1 m Price is per meter, if you order 2x it is 2 meters etc. L3 Liner (Lightly Lubricated Liner) Internal lubrication, which reduces friction during braking, especially in areas where the outer cover is bent, as this increases the service life of the cable*

perfect for 70's frames without a fixed counter support for the rear derailleur Shimano Quality Made in Japan in the late 70s made of steel - chrome plated

Drop out stop screws Axle stop screws for drop out x2 fixable axle stops for old racing bike frames with dropouts open to the front Colour: silver Price is for one pair / 2 pieces

similar to Tektro 750 brake levers but with a beautiful, perfectly polished surface, super high-quality finish and finally with a sensible adjuster 3-finger brake lever pair for urban bike, road bike singlespeed  ideally suited for flatbar, flat or moon handlebars for handlebars with 22.2mm diameter compatible with side-pull and cantilever brakes Brake cables with roller nipples/MTB are required Color: silver high gloss polished Weight: 154g per pair Scope of delivery: 1 pair of brake levers right + left

made of polished stainless steel, stable and high quality, also available in narrow 36 mm Set consists of front wheel + rear wheel mudguard with struts, bracket and mounting material (short screws for mounting on the dropout eyelet "with thread" are included, if longer screws are required, see Screw set Made in Italy exclusively for Studio Brisant Wheel size 28 inch / 700c  for mounting with nuts please buy "bolt set" in the neighboring offer additionally, because too individual in 36 mm "can" be mounted with clamp (included with 36 mm), from 42 mm the clip is used so that the struts rest on the sheet metal, otherwise too wobbly Widths: available in 36 + 42 + 48 + 51 mm  Length VR 740, HR 1210mm (for 36 to 51 mm plates) NEW in 62mm width and size 27.5 inch 650B with 355mm Radius (below the pictures there is an example of a customer's bike with the 650B plates, on a 26 inch MTB bike) Micro scratches on the side seam are possible, but only visible very close up and not noticeable after mounting, professors of cycling please do not buy! up to max. 32 mm tire width - 36 mm recommendedfrom 32 to approx. 35 mm tire width - 42 mm recommendedfrom 37 to approx. 40 mm tire width - 48 mm recommendedfrom 38 to approx. 42 mm tire width - 51 mm recommended NEW in our program: 30mm Alu Studio plates for 25 to max 28mm tires Remark: Mudguards cannot be tried on, as scratches, light dents etc. always occur! Please check beforehand whether mounting is possible (see mounting instructions): Eyes on the dropouts, with or without thread, which screws are required?  Hole in the small cross brace in the crank area, can I drill or use the Honjo clip use? Enough space between tires and brakes?  under "mudguard accessories" you will find adapters for axle mounts or quick releases

Sunrace retro shifter set for down tube mounting  Frame shifter with clamp for down tube with 28.6 mm diameter available in 3 versions: 6, 7 or 8 speed made of polished silver aluminum a complete set consisting of: 2x shift levers left + right, 2x shift cables incl. approx. 28 cm black outer shift cover Front derailleur 2/3 speed possible with 2:1 ratcheting - Shimano compatible Weight: approx. 100 g A beautiful spare part at an unbeatable price - highly recommended

Jagwire shift cable inner cable 1,1mm x 2000mm incl. end sleeves bike Diameter: 1.1 mm length: 2000 mm incl. Jagwire end sleeves for shift cables in 1, 2, 4, 6, 8 or 10 pieces Variant available high quality, ground stainless steel/stainless steel slides

NOS counter bracket for chain stay cable stop Bowden cable - shift cable perfect for 70's frames without fixed counter bracket for rear derailleur for classic stays from 15-17mm silver nickel plated steel