No results were found for the filter!
Weldtite TF2 lithium grease 100g can Weldtite TF2 Lithium Grease Can Weight: 100g water resistant and anti-corrosive suitable for headsets, bottom brackets, hubs and pedals Made in UK
€14.80 *
Content 0.1 Kilogramm (€148.00 * / 1 Kilogramm)
Pedalschlüssel 15mm + 6/8mm Inbus ergonomischer Pedalschlüssel 15mm Maulweite mit 6mm und 8mm Innensechskant mit integriertem Flaschenöffner Material: Kohlenstoffstahl Farbe: schwarz-blau Länge: 29,5cm
€13.80 *
2 pcs. tire levers from "Velox" very stable +... very stable, until now the best honors with made! spares your rims is easy to apply - also suitable for carbon
€2.20 *
CYCLUS TOOLS Puller bottom bracket + Campagnolo... Workshop version Top quality Ultra/Power Torque + Sram GXP + Miche Evo Max with 3/8" inch drive
€38.80 *
CYCLUS TOOLS Impact 1" inch + 1 1/8" inch fork... Workshop quality "Made by Cyclus Top quality - Perfectly processed with adapter suitable for 1" inch (25.4mm) and 1 1/8" inch (28.6mm)
€54.80 *
CYCLUS TOOLS ejector 1" inch headset ejector Workshop quality "Made by Cyclus to recommend without reservation, my daily tool in 1" inch (25.4 mm)
€49.80 *
CYCLUS TOOLS ejector 1 1/8" inch headset ejector Workshop quality "Made by Cyclus to recommend without reservation, my daily tool 1 1/8" inch (28.6 mm)
€49.80 *
CYCLUS TOOLS fork cone puller - 1 inch forks... Workshop version The advantage of the fork cone remover is that you do not scratch the fork when removing the fork cone and do not damage the headset cone ring. The fork cone puller is universally usable for pulling off fork cones up to...
€284.80 *
Zefal °Kit May Day° Pump Set tire levers +... NEW Zefal °Kit May Day° Pump Set Tire Lever + Repair Kit + Pump + Holder Model pump: Air Profil FC01 - Pump body in aluminium Adapter for car valve/Schrader or French valve/Presta Set contents: 1 x Air Profil FC01 + 3 x Z-Levers tire...
€18.80 *
CYCLUS TOOLS Straightening tool for pressing... Workshop version Weight: 532 g It may be necessary to loosen or remove individual spokes before use. Place the tool in the place of the height impact to be removed (recess in the rim) between the hub body and the inside of the rim. Now...
€49.80 *
CYCLUS TOOLS spoke wrench for Shimano system... Workshop version This spoke wrench is suitable for centering Shimano system wheels 4.3 mm and 4.4 mm mounting with a plastic sheath for comfortable and non-slip application Weight: 62 g
€9.80 *
Viewed