We offer worldwide shipping

Handlebars & Parts

Stirrups and again stirrups, in connection with periscopa like stems a good possibility to be on the way comfortably, as a cheap high quality "Studio own production" (Handlebar Bracket) with matching Kalloy stemor noble in nitto qualities(MT10 Stem) and many more. Or also with pleasure sporty with a good cheap almost straight handlebar, in all handlebar widths! The studio shortens this model in 2 cm steps, according to your wishes.
But you should consider the width carefully, if you want to fit grips, brake levers, or a shifting unit.
Especially when it comes to classic racing handlebar conversions it often becomes difficult: If a vintage 3TTT stem with its 26 mm clamp fits to a new handlebar with 25.4 mm, or even worse a Cinelli with 26.4 mm, then it becomes quite complicated and often only a complete exchange of the stem handlebar unit works.
The studio will be happy to advise you in these matters and is looking forward to your message or call.

Stirrups and again stirrups, in connection with periscopa like stems a good possibility to be on the way comfortably, as a cheap high quality "Studio  own production"  ( Handlebar... read more »
Close window
Handlebars & Parts

Stirrups and again stirrups, in connection with periscopa like stems a good possibility to be on the way comfortably, as a cheap high quality "Studio own production" (Handlebar Bracket) with matching Kalloy stemor noble in nitto qualities(MT10 Stem) and many more. Or also with pleasure sporty with a good cheap almost straight handlebar, in all handlebar widths! The studio shortens this model in 2 cm steps, according to your wishes.
But you should consider the width carefully, if you want to fit grips, brake levers, or a shifting unit.
Especially when it comes to classic racing handlebar conversions it often becomes difficult: If a vintage 3TTT stem with its 26 mm clamp fits to a new handlebar with 25.4 mm, or even worse a Cinelli with 26.4 mm, then it becomes quite complicated and often only a complete exchange of the stem handlebar unit works.
The studio will be happy to advise you in these matters and is looking forward to your message or call.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
1 From 21
No results were found for the filter!
Kugeln aus Carbonstahl 1/8" 5/32" 3/16" 1/4" Zoll, pro Stück
Carbon steel balls 1/8" 5/32" 3/16" 1/4" inch,...
Carbon steel balls in 1/8" 5/32" 3/16" 1/4" inch Price per piece 4 different ball dimensions for different purposes 1/8" - 3,175 mm e.g. for freewheels 5/32" - 3.970 mm e.g. for head sets 3/16" - 4.762 mm e.g. for front wheel hubs 1/4" -...
€0.15 *
Hint!
Velox, Tressostar 90, Vintage, Textil, Lenkerband, Das Stärkste,
Velox Tressostar 90 Vintage textile handlebar...
the price is for 1 roll of textile handlebar tape (you need 2 for a racing handlebar) high quality and perfect for a vintage racer Material cotton, stronger and longer than the 85 Tressorex Size 2,60 m x approx. 22 mm (the 25 mm...
From €2.90 *
1 Zoll 25,4 mm Aluminium Spacer für klassische Steuersätze 2, 5, 10,15, 20mm in silber-schwarz
1 inch 25.4 mm aluminium spacer for classic...
Price is per piece Aluminium silver high gloss anodised optimal to adjust the seat position in silver or black selectable Outer diameter 32 mm, inner diameter 25.4 mm variants available in 2 + 5 + 10 + 15 + 20 + 30 mm
From €1.30 *
Schaft Vorbau Kalloy 1 Zoll Alu in 60, 80, 100mm - silber
Stem stem Kalloy 1 inch aluminium in 60, 80,...
Choice of stem length 60 mm + 80 mm + 100 mm Stem ( 22,2 mm ) robust and solid aluminium stem for shank diameter 22.2 mm 18 degrees inclination* *Clamping dimension 25.4 mm the shaft length for the model with 100 mm projection is 150 mm,...
From €14.80 *
Kugelhalter Steuersatz 1" o. 1 1/8" Zoll Kugelring, Pro Stück
Ball holder headset 1" or 1 1/8" inch ball...
Ball holder for headset 1" or 1 1/8" inch Price per piece two different ball rings for 1 inch or 1 1/8 inch headset 1" ball ring has 16x 5/32" balls 1 1/8" ball ring has 22x 5/32" balls BSA inner bearing ball ring has 9x 1/4" balls
€1.80 *
Hint!
Certoplast Isolierband schwarz Kunststoff Klebeband 15 mm Lenkerabschlußband
Certoplast insulating tape black plastic...
Certoplast insulating tape black plastic adhesive tape 15 mm handlebar end tape Price for 1 roll - 4,5 m width: 15 mm synthetic Colour: black the right tape for the handlebar tape end, can be pulled easily and is soft
€2.60 *
Deda Elementi - Lenkerband Bar Tape Soft Touch alle Farben
Deda Elementi - Handlebar Tape Bar Tape Soft...
Handlebar tape from Deda Elementi is one of the best in the world amorphous extremely stretchy for easy installation finally a handlebar tape that shows full colours throughout, without small brown cork dots self-adhesive version incl. 2...
From €9.80 *
2x Chrom Lenkerstopfen Velox für Rennlenker Lenkerendstopfen Kunststoff Rennrad
2x chrome handlebar plugs Velox for racing...
2x chrome handlebar plugs Velox for racing handlebars handlebar end plugs plastic road bike suitable for handlebars inner diameter 20-23 mm e.g. racing handlebars, or with cutter narrow cutting edges then also for flatbars etc. plastic...
€2.00 *
Moustache Lenker silber poliert 23,8 mm Klemmung 25,4 mm - 3 TTT Form
Moustache handlebar silver polished 23,8 mm...
Aluminium silver glossy anodised old classic form for mounting racing bike brake levers, i.e. 23.8 mm diameter*. Tektro additional brake levers can be plugged in at the end see Tektro additional brake levers perfect for a vintage racer...
€23.80 *
Hint!
Flat Bar 3° Lenker Aluminium / silber oder schwarz / Breite nach Wunschmaß!
Flat Bar 3° handlebars aluminum silver or black...
Straight aluminium handlebars with plastic plug simple but good silver shiny anodized, like polished perfect for a vintage racer to convert to a straight handlebar/speedbike Model Flat 3°, almost straight Width 58 cm, Diameter 22.2 mm,...
From €13.80 *
Hint!
Lenkerbuegel Trainings Buegel Moustache Lenker silber
Training bar - Art Moustache handlebars...
Studio Brisant handlebars in own production, therefore good and cheap handlebars high quality and perfect for a vintage racer or city bike slightly cranked/inclined (1,5 cm) 49 cm wide M/M Handle width 15 cm Diameter 22.2 mm, Clamping...
€19.80 *
Singlespeed Spacer, Distanzringe Aby.K in 7 Farben 3 + 5 + 10 mm Breite
Singlespeed Spacer / Spacer rings Aby.K in 7...
Price is for 1x spacer/per piece for conversion of cassette hubs to single speed Colours(anodized): silver, black, red, blue, gold, purple, copper-orange, green the lockring for Shimano HG and compatible cassette hubs must be ordered...
From €2.20 *
1 From 21
Viewed