Puller
Filter products
CYCLUS TOOLS assembly tool for conv. bottom bracket, 37 mm SW right-hand bearing shell
Workshop version Top quality for efficient work Wrench opening: 37 mm right-hand bearing shell
CYCLUS TOOLS Puller Cassette - Shimano Hyperglide
Workshop version Top quality width across flats: 24mm
Average rating of 5 out of 5 stars
CYCLUS TOOLS Freewheel Puller Atom | Mailard | Regina | Suntour
CYCLUS TOOLS Puller for vintage road bike sprockets Workshop version Top quality suitable for Atom, Mailard, Regina, Suntour Suntour 4/5/6-speed, for example
CYCLUS TOOLS extractor bottom bracket for Campagnolo Cart
Workshop version Top quality
Contec sprocket puller
CONTEC TFM-210 sprocket puller High-quality hardened steel puller for BMX and singlespeed freewheel sprockets, suitable for 24 mm wrenches
3x Zefal tyre levers Z Levers in red - solid design
Telescopic pocket pump with soft plastic holder for fastening with Velcro up to 6 bar with telescopic pull-out with extension piece to pull out Adapter to turn/screw on car valve or Presta/French valve reasonable quality pump with which you can operate Schrader and Presta valves
CYCLUS TOOLS Puller bottom bracket + Campagnolo + Ultra Torque+Sram+Miche + 3/8 "inch
Workshop version Top quality Ultra/Power Torque + Sram GXP + Miche Evo Max with 3/8" inch drive
CYCLUS TOOLS Freewheel Puller Shimano + Dicta + White Industry Compatible
CYCLUS TOOLS Freewheel Puller Compatible: Shimano + Dicta + White Industry Workshop version
Cyclus Tools Puller Cassette SACHS P.G. and screw-in wreaths
Workshop version Especially suitable for Sachs screw freewheel pinions Top quality width across flats: 24mm
Crank puller for square crank + Octalink + ISIS systems
Crank puller for square crank + Octalink + ISIS systems for 14 mm open-end wrench reasonable quality for the price
CYCLUS TOOLS Puller Cassette + Campagnolo + 8-9-10-11 -fach
Workshop version Top quality width across flats: 24mm
CYCLUS TOOLS puller Suntour - 4 flights
Workshop version Top quality width across flats: 24mm
Cyclus Tools Puller Inner Bearing | FAG
Cyclus Tools Bottom bracket hexagon puller FAG 28 mm wrench size 6 teeth Material: stainless steel suitable for FAG as well as for Campagnolo bottom brackets such as Centaur (up to 2006), Mirage or Veloce
CYCLUS TOOLS chain whip sprocket wheel dismantling tool - for 5-8-speed cassettes
Workshop version for clean work The tool is suitable for assembling and disassembling bolted rings as well as for mounting such rings on the hub body. Furthermore, HD and ED cassettes can be removed from the hub rotor (with the aid of the appropriate puller). Place the chain (1) on the sprocket teeth according to the desired direction of rotation and support the lever on the chain segment (2).
Bearing shell wrench for MT800/BBR60
Bearing shell wrench for Shimano MT800/BBR60 1/2'' socket wrench or wrench size 24mm not suitable for standard Hollowtech II bearings like Neco,Shimano,Truvativ
Bearing cup wrench for Hollowtech II | Neco HT
Bearing cup wrench/ bottom bracket nut suitable for Neco HT bearings and Shimano Hollowtech II 1/2'' socket wrench or wrench size 24mm
CYCLUS TOOLS cassette puller Shimano + Campagnolo cassettes
CYCLUS TOOLS cassette puller Workshop version with side for SHIMANO and CAMPAGNOLO Clean working
CYCLUS TOOLS chain whip sprocket wheel dismantling tool - for 9-10x cassettes
Workshop version for clean work The tool is suitable for assembling and disassembling bolted rings as well as for mounting such rings on the hub body. Furthermore, HD and ED cassettes can be removed from the hub rotor (with the aid of the appropriate puller). Place the chain (1) on the sprocket teeth according to the desired direction of rotation and support the lever on the chain segment (2).
CYCLUS TOOLS fork cone puller - 1 inch forks lSuspension forks, IHS forks etc
Workshop version The advantage of the fork cone remover is that you do not scratch the fork when removing the fork cone and do not damage the headset cone ring. The fork cone puller is universally usable for pulling off fork cones up to max. 40 mm.as an accessory you will receive a replacement claw for pulling off fork cones up to max. 49 mm It is suitable for all types of headsets or forks (e.g. suspension forks, IHS forks, etc.
Shimano Crank Puller TL-FC10 for square crank Compatible 600EX, 105, etc.
Workshop version for 14 mm open-end wrench Shimano crank puller for standard cranks. Not suitable for Octalink or Hollowtech-II cranks
Zefal repair kit tour repair set repair kit bicycle
enables quick hose repair - perfect for an emergency during your bike tour Price for 1 repair kit Content see pictures
CYCLUS TOOLS Puller bottom bracket for Shimano Compact
Workshop version Top quality width across flats: 32mm
Cyclus Tools crank puller Octalink or square cranks 22 or 24 mm
Right-hand thread with movable small roller suitable for square cranks with 22 mm thread (M22x1) to choose from or 24 mm special size for repair set thread M24x1 or Octalink (e.g. Shimano BB-7700, 6500, 5500)