No results were found for the filter!
Carbon steel balls in 1/8" 5/32" 3/16" 1/4" inch Price per piece 4 different ball dimensions for different purposes 1/8" - 3,175 mm e.g. for freewheels 5/32" - 3.970 mm e.g. for head sets 3/16" - 4.762 mm e.g. for front wheel hubs 1/4" -...
€0.15 *
The Sapim Race is a light and stable butted spoke Spokes in desired quantity and length from 270 - 300 mm with matching brass polyax nipples in 14mm length stainless steel DD spoke, diameter 2mm - 1,8mm - 2mm In silver or black Weight...
From €0.58 *
1 roll of textile rim tape (you need 2 for one wheel set) high quality and perfect for a vintage racer Material cotton, self-adhesive 2 m roll different widths in 10 - 13 - 16 - 19 - 22 mm x 2 m Rim tape with textile fibre from Velox,...
€2.90 *
High quality stainless steel, no rusting perfect for a vintage racer or singlespeed M5 thread x 16 mm Price is for 2x piece
€1.40 *
Stainless steel screw set to facilitate the assembly of the mudguard 2 pieces/set (2x screws, 2x nuts "self-locking", 2x washers) e.g. for mounting on dropouts without thread in the eye 6x different lengths available/selectable in thread...
From €1.60 *
Original Swallow for 18 mm tyres up to 28 mm width Price is per piece available in 40 mm or 60 mm SV valve (French)
From €5.80 *
Ball holder for headset 1" or 1 1/8" inch Price per piece two different ball rings for 1 inch or 1 1/8 inch headset 1" ball ring has 16x 5/32" balls 1 1/8" ball ring has 22x 5/32" balls BSA inner bearing ball ring has 9x 1/4" balls
From €1.50 *
very stable, until now the best honors with made! spares your rims is easy to apply - also suitable for carbon
€2.20 *
Schwalbe tube no. 17 SV + AV + DV 700CC - 28" bicycle tube bicycle Original Swallow for 28 mm tyres up to 45 mm width Price is per piece with SV valve (French), AV valve or DV valve available
€5.40 *
High quality stainless steel, no rusting perfect for a vintage racer or singlespeed Price is for 2x piece
€1.40 *
Price is for 2 pieces Noble valve caps made of aluminium, colour anodized, CNC milled, silver, black, green, copper orange (shiny) and purple are now matt anodized! perfect for a vintage racer or single speed - the "icing on the cake"......
From €5.80 *
Aluminium anodized/polished + steel axle good and favourable quality* * Installation width HR from 120 mm(shortening) to 135 mm possible A plus in safety, because the clamping axles can only be opened with a special key.
€13.80 *
Viewed