Up - ejector
Filter products
CYCLUS TOOLS ejector 1 1/8" inch headset ejector
Workshop quality "Made by Cyclus to recommend without reservation, my daily tool 1 1/8" inch (28.6 mm)
CYCLUS TOOLS ejector 1" inch headset ejector
Workshop quality "Made by Cyclus to recommend without reservation, my daily tool in 1" inch (25.4 mm)
CYCLUS TOOLS Impact 1" inch + 1 1/8" inch fork cone
Workshop quality "Made by Cyclus Top quality - Perfectly processed with adapter suitable for 1" inch (25.4mm) and 1 1/8" inch (28.6mm)
Impact tool for headset claws | Ahead
Insertion tool for Ahead claws Fork steerer diameter: 1 1 / 8" - 28.6 mm Color: black Procedure: Step 1: position the 1 1/8'' claw in the center of the steerer tube. Step 2: Guide the sleeve over the 1 1/8'' claw and over the steerer tube. Step 3: Insert impact tool into the sleeve and drive the claw into the steerer tube with powerful blows.
CYCLUS TOOLS impactor - for Ahead claw 1" and 1 1/8"
Workshop version for Ahead claw 1" and 1 1/8 The Cyclus Tools impactor guarantees exact insertion of the Ahead claw into the steerer tube at a previously defined impact depth Screw the required socket into the impactor by hand (1" or 1 1/8"). Now screw the claw to be mounted onto the grub screw using the cross hole as far as it will go. Place the tool on the steerer tube and hammer it in with a hammer until it stops. By turning the knurled screw to the left, you can then remove the impactor from the steerer tube.
CYCLUS TOOLS tappet fork cone suitable for 1" and OVZ max. 32mm
Workshop version Top quality Forks with fork crown of max. 32mm Suitable for fork cone 1" inch and 1 1/8" inch