Products from Cyclus Tools

Workshop version for Ahead claw 1" and 1 1/8 The Cyclus Tools impactor guarantees exact insertion of the Ahead claw into the steerer tube at a previously defined impact depth Screw the required socket into the impactor by hand (1" or 1...

Workshop version Special oil suitable for milling and cutting work for the easier processing of cutting operations e.g. thread cutting, milling

Cyclus Tools pedal wrench SW 15mm bicycle 15x15mm open-end wrench Wrench size: 15x15mm high-grade pedal spanner

Workshop version for clean work The tool is suitable for assembling and disassembling bolted rings as well as for mounting such rings on the hub body. Furthermore, HD and ED cassettes can be removed from the hub rotor (with the aid of...

Workshop version Top quality Forks with fork crown of max. 32mm Suitable for fork cone 1" inch and 1 1/8" inch

Workshop version Top quality Ultra/Power Torque + Sram GXP + Miche Evo Max with 3/8" inch drive

Workshop version Top quality

Workshop quality "Made by Cyclus Top quality - Perfectly processed with adapter suitable for 1" inch (25.4mm) and 1 1/8" inch (28.6mm)

Workshop quality "Made by Cyclus to recommend without reservation, my daily tool in 1" inch (25.4 mm)

Workshop quality "Made by Cyclus to recommend without reservation, my daily tool 1 1/8" inch (28.6 mm)

Workshop version The advantage of the fork cone remover is that you do not scratch the fork when removing the fork cone and do not damage the headset cone ring. The fork cone puller is universally usable for pulling off fork cones up to...

Workshop version Weight: 532 g It may be necessary to loosen or remove individual spokes before use. Place the tool in the place of the height impact to be removed (recess in the rim) between the hub body and the inside of the rim. Now...